The independent reference for event workSign in
GlossaryUpdated

General service contractor (GSC)

The main contractor a trade show hires to build the floor, move exhibitor freight and supply booth labor. Freeman and GES are examples.

Also called: GSC, official service contractor, show decorator, official general contractor
Hired by
Show management
Also called
Official service contractor, decorator
Examples
Freeman, GES
Main services
Floor setup, freight, booth labor, rentals
Drayage billed
Per 100 lb, rounded up
EAC notice (GES)
At least 30 days before move-in

Key characteristics

One per show Show management picks a single GSC as the official provider.

Controls the freight Material handling on the floor runs through the GSC.

Works under union rules Its labor follows local union jurisdiction in each city.

Runs the service kit Exhibitors order from its manual and online store.

General service contractor (GSC) vs related terms

Load-inScopeGSC: the company. Load-in: the time when freight and gear come into the venue.FocusThe GSC runs move-in on a trade show floor.
Lead retrievalScopeBoth are ordered through the exhibitor service kit.FocusThe GSC builds the booth space; lead retrieval captures visitors once the show opens.

What is a general service contractor?

A general service contractor, or GSC, is the company a trade show hires to build the show floor and serve its exhibitors. Show management picks one, and it becomes the official provider for most things on the floor.

Freeman and GES are two of the best-known GSCs in the US. You will also hear "official service contractor" or, in older show-floor slang, "the decorator", because the GSC used to be the company that hung the drape and laid the carpet.

If you work a trade show as booth staff, the GSC is the reason your booth exists when you arrive. If you exhibit, it is who you order from, and who you pay to move your freight.

What the GSC does

The GSC handles the parts of a show that every exhibitor shares. It also sends out the exhibitor service kit, the manual and online store where exhibitors order everything.

A GSC typically handles
The floor plan, aisle carpet, booth drape and show signsRental furniture, carpet and booth packages for exhibitorsMaterial handling: moving exhibitor freight from the dock to the booth and backLabor to set up and take down booths (installation and dismantle, or I&D)Storing empty crates during the showThe exhibitor service kit with forms, deadlines and rules
Source: Exhibit Insurance and EACs Explained; A Guide to Exhibition Personnel, GES, 2026

Some services come from other official vendors the show names, like electrical, internet or lead retrieval. They are ordered through the same kit.

Who does what on the show floor

Four groups touch a booth before the doors open. Mixing them up is where most surprises come from.

General service contractor

Hired by show management. Builds the shared floor, moves freight and supplies union labor.

Exhibitor-appointed contractor (EAC)

Any outside company the exhibitor hires to install, take down or service its booth, such as an exhibit house.

Exhibitor's own employees

Can do some setup themselves. How much depends on the city and the show's rules.

Booth staff (brand ambassadors)

Work the booth during show hours: greet, demo, scan badges. They do not build booths.

Using your own contractor (an EAC)

Exhibitors do not have to use the GSC for booth setup. They can bring their own contractor, called an EAC. But the show wants to know in advance, and it wants proof of insurance.

How to bring an EAC on a GES show
1

File a Notice of Intent

Submit it on the show's ordering site at least 30 days before move-in.

2

Get the contractor's insurance certificate

It must show general liability cover and stay valid from move-in through move-out. Check the show for the required limits.

3

Upload the certificate

Also at least 30 days before move-in. GES uses a certificate portal with a $21 fee per upload.

4

Confirm the rules on site

The EAC still follows the show's labor rules and the local union rules.

Deadlines varyEvery show sets its own EAC deadline, and many are earlier than 30 days. The date in your exhibitor service kit is the one that counts.

Material handling (drayage): how it is billed

Material handling, also called drayage, is the fee for moving your freight from the loading dock or warehouse to your booth, storing the empty crates, and moving it all back out. On most show floors, the GSC or its partner does this. Small loads exhibitors may carry in themselves, where local rules allow, are the exception.

It is billed by weight, in units of 100 pounds. The weight is rounded up, and each shipment has a minimum charge.

How drayage adds up
Billing unitPer 100 lb (often written CWT)RoundingUp to the next 100 lb: 265 lb is billed as 300 lbMinimumSet per shipment: 100 lb on one 2026 show form, 200 lb at othersExtrasOvertime and special handling on top

That is why one big crate usually costs less to handle than five small boxes. Each box can hit its own minimum. Late or unlabeled shipments can also be charged as special handling.

What exhibitors can do themselves, by city

This is where location matters most. Union agreements and local rules decide how much work an exhibitor's own staff may do. Pick a city to see its rules.

Exhibitor setup rules in two convention cities
Two cities shown, as of November 2026. Rules can change by show and venue, so check your exhibitor service kit before you plan your own setup.
Las Vegas
Who claims booth setup
Teamsters Local 631 claims install and dismantle work, according to a show labor-rules sheet.
Exhibitor's own staff
Full-time employees may set up their own display.
Usually outside union work
Placing product, opening cartons and testing products.
Check
Each show's exhibitor manual. Rules vary by show.
Source: McCormick Place Exhibitor Bill of Rights (GES exhibitor kit) · As of Nov 2026

Labor costs move with those contracts too. In Las Vegas, Exhibit City News reported that Local 631 ratified a four-year contract with a 22% increase in wages and benefits, as covered in our CES 2027 booth staffing story.

Booth staff don't build booths

This trips up a lot of first-time exhibitors. Brand ambassadors, product demonstrators and greeters are booked to work the booth during show hours. Building it, wiring it and moving freight belongs to the GSC, an EAC or, where the rules allow, the exhibitor's own full-time employees.

For booth staffIf you are asked to carry crates, use a hand truck or climb a ladder to hang a sign, check with your agency first. In union cities that work may belong to someone else, and agency staff are not the exhibitor's own employees.

Common questions

What does GSC stand for at a trade show?
General service contractor: the main contractor show management hires to build the floor and serve exhibitors. Freeman and GES are common examples.
Why is it called a decorator?
It is an older nickname from when the contractor's main job was decorating the hall with drape, carpet and signs. Some exhibitors still use it.
Do I have to use the GSC to set up my booth?
No. You can hire your own exhibitor-appointed contractor if you file the notice and insurance on time, or set up with your own full-time staff where local rules allow. Freight moves on the floor usually stay with the GSC.
How is drayage calculated?
By weight, per 100 pounds, rounded up, with a minimum per shipment. Overtime and special handling cost extra.

Best practices

Read the service kit on day one Write down every deadline and price tier.

Consolidate freight One labeled crate is easier and cheaper to handle.

Common mistakes

Missing the EAC deadline Without a filed notice and insurance, your contractor can be turned away.

Shipping many small boxes Each one can hit the minimum drayage charge.

Using booth staff as builders Agency staff are not the exhibitor's own employees, and union rules may forbid it.

Assuming one city's rules apply everywhere Las Vegas and Chicago draw the line differently, and other cities set their own rules.

Used on these shiftsSetup and teardown crewStagehandBrand ambassadorFind setup and teardown crew shifts →
See alsoLead retrievalLoad-inLoad-outCollective bargaining agreementHow Trade Shows Work: Exhibitors, Booths and Behind-the-Scenes OperationsSetup and teardown crew